Mast Mast sanded  to state to remove all pitting and prepare for painting. Lightning protection ground plate plate 3' x 4" mounted to hull on port side.  To drill hole as close to the mast as possible I had to remove grey water tank out of the locker. To remove tank i had to disconnect sanitation hoses, and it was pretty hard task.  Plate installed on two bronze 1/2 bolts. One is under the waste tank, second one under the floor sole under the cabin table. Plate is mounted using 3M 5200 adhesive.  Plate compressed to the hull and left for the week.  Engine  Water strainer installed, all clamps set on raw water hoses. Installed seaflo water strainer, to install it I had to make a stand to let access for cleaning it.  Strainer installed above water line.  Waterline painting  Put masking tape and lightly cover edge between white topside paint with the topside paint, then next day applied layer of blue paint. I am keeping fingers crossed it ...